WolfCamera.com HomePage

PocketWizard MultiMax Transceiver

Be the first to review this product

MultiMax Transceiver

Manufacturer # 802-450

Our Stock # 642463006

PocketWizard MultiMax Transceiver

Price:
$295.00

PocketWizard MultiMax Transceiver Features:
The most advanced Wireless Triggering System available. If your needs go beyond simple triggering" the MultiMAX is for you. New MultiMAX Features available via the PocketWizard Utility for all USB-enabled MultiMAX radios.

  • Long Range Mode for remote camera triggering doubles the usable distance between two MultiMAX radios
    This was found particularly useful by photographers shooting in sports arenas" photographing wildlife and using it for other challenging remote camera applications such as aerial photography.

  • Close Range Mode" reduces the transmit power of the MultiMAX radio when it is in Transmit mode
    This new mode is useful if you have a receiver very close to your transmitter (within a few feet)" such as on a basketball net" studio shoots" macro photography or table top product shoots.

  • The Noise Sniffer and Signal Strength Indicator are new tools for troubleshooting RF noise
    The Noise Sniffer shows the ambient and peak radio noise for the channel and frequency displayed.

    The Signal Strength Indicator (Receive Only) performs two functions:

    1) If a MultiMAX radio has NOT been triggered" it acts as a Noise Meter and indicates steady noise in the area.
    2) If your radio has been triggered" the Signal Strength Indicator shows the strength of the last trigger received.

    This is useful to gain a quick view of the local noise level in the area you intend to shoot in so you can pick a channel with less interfering noise.

  • If the above tools indicate excessive RF interference on your Custom ID's frequency" you now have the option to Move your Custom ID to any PocketWizard frequency for better triggering in crowded shooting environments.
    What is a Custom ID? It is a private digital code that no one can trigger but you. It is offered as a premium service by PocketWizard.

  • Radio Relay (Repeater) Mode (Receive Only) allows you to add another MultiMAX radio to increase your range.
    It receives and transmits on the same channel. This new mode is valuable to extend the maximum range of a MultiMAX in any radio environment. If you are shooting in a RF noisy environment such as a sports arena and your current range is 200 feet" add another MultiMAX radio in Radio Relay Mode and gain another 200 feet. This mode is also helpful when shooting wildlife. If your current range is 800 feet because of trees and you would like to be a minimum of 2000 feet away from your subject" add two more MultiMAX radios to your system and increase your range.
MultiMAX Transceiver Advanced Communications Features:

  • Thirty-two" 16-bit channels
    Trigger individual or groups of lights and/or cameras simultaneously or individually. Critical to working in crowded venues or with multiple lighting set-ups.

  • Selective Quad-Triggering
    Activate or deactivate electronic flash units and/or cameras wirelessly in 4 separately controllable zones (ABCD) without leaving the camera position - audible and visual confirmation.

  • Relay Mode
    Acts as a transmitter and receiver" triggering both camera and flash from up to 1600 feet away. Upon receiving a signal from a remote transmitter" the on-camera receiver instantaneously switches to transmit mode and signals the remote flash units to fire in sync with the remote camera.

  • True Trigger Confirmation
    Verifies each successful triggering and indicates misfires via audio and/or visual confirmation signals. No separate transmitter/receiver system can do this.

  • Product Compatibility
    PocketWizard MultiMAX communicates with all PocketWizard-enabled photo gear including select Profoto" Dynalite" Norman and Photogenic flash and select Sekonic light meters.
MultiMAX Transceiver Time Control Features:

  • Rear-curtain Sync
    Capture ambient streaks of light at slow shutter speeds" even for cameras without this feature. Delay the sync time to fire the electronic flash unit near the end of the exposure" with precision of 1/10"000th of a second. Includes pre-programmed shutter speeds of 1 to 1/60th of a second" with additional setting configurable via the MultiMax's delay time adjustment screen.

  • Intervalometer
    Perform time-lapse imaging and photograph events as they unfold. Capture up to 10"000 exposures over a time period of approximately 18 hours using the integrated intervalometer.

  • Multi-pop shooting
    Adds depth-of-field to images or generates stroboscopic motion images. Allows your flash to be fired up to 10"000 times on the same exposure while waiting for a user programmed recycle time" from 1/100th to 10 minutes" between pops.

  • Precision Delay Times
    Custom set in transmit mode for remote units and/or port 2 on the MultiMAX. In receiver mode" precision delay offers delay sequencing or camera/flash synchronization.

  • SpeedCycler
    Perform sequential triggering for up to 4 cameras or 4 electronic flash units. Ideal for multi-angle camera shots" and reducing recycle time in fast paced photo shoots" by triggering the next flash in line" while the previous flash is charging. With 4 PocketWizard MultiMax transceivers connected to 4 cameras" the SpeedCycler mode can quadruple frames-per-second firing speed.

  • Lag Time Equalizer Software
    Measures reaction time between camera trigger signal to shutter firing. This lag time is used to synchronize single or multiple cameras and strobes to fire in unison" with measurable accuracy to 1/10"000th of a second.

  • Ultra-fast Microprocessors
    Achieve trigger-response times as short as 1/3000th of a second for reliable top-end sync speeds of 1/500th for focal plane shutters and 1/1000th for leaf shutters.
MultiMAX Transceiver General Features:

  • Fast set-up
    Simply power up" choose a channel" connect a flash cable and start shooting.

  • User Interface
    Easy-to-read LCD display and rubberized keypad allows quick setting adjustments and confirmation of camera and flash status. Display and buttons can be backlit with the push of a button. Locking keypad eliminates unintended setting changes. Default settings can be quickly restored.

  • Trigger Rate
    Trigger lights or cameras at a sustained rate of up to 12 fps; faster than the best DSLR today.

  • Size
    Durable" compact design with an unobtrusive" rubberized antenna. The total height of the transceiver and antenna is less than 6.5 inches" and it weighs in at 6oz including batteries.

  • Compatibility
    Compatible with virtually every popular flash and professional camera. Available miniphone connector cables support all major brands of lighting equipment in lengths up to 16'. A variety of dedicated camera triggering cables are also available.

  • Power Supply
    2 AA batteries" with a typical life of approximately 60 hours. An optional AC adapter is available.

  • Frequency
    US PocketWizard transceivers operate on an uncrowded frequency of 344 MHz. See product spec's for frequencies in other countries.

  • Mounting
    A sturdy lock-ring for hot shoes ensure a secure fit to your camera or bracket or use the 1/4 - 20 mount or lanyard.

PocketWizard MultiMax Transceiver Specifications:

  • Range: 1600 feet (approx. 500 Meters)
  • Frequency:
    US/FCC:
    344MHz (Standard Triggering)
    346.5-354MHz (Quad-Triggering)
    CE:
    433.62 MHz (Standard Triggering)
    434.22 MHz (Quad-Triggering)
  • Code:
    Complex 16/24 bit digitally coded signals
  • Channels:
    32 Digitally coded ID#'s
    16 Original Classic Channels
    16 Quad-Triggering Channels
  • Synch Speed:
    Up to 1/250 (focal plane)
    Up to 1/500 (leaf shutter)
    Up to 1/1000 (Fast Mode)
  • Batteries:
    2 AA batteries (IEC:LR6)
    60 hour life
  • AC Adapter:
    Optional AC adapter (PW-AC-2)
    3 VDC unregulated, 0.3 A (300 milliamp) or higher
    4.5 VDC regulated, 0.2 A (200 milliamp) or higher, (recommended)
  • Housing:
    Custom molded high impact plastic with captive battery door
  • Weight:
    153 grams (5.4 ounces) (w/ alkaline batteries)
  • Dimensions:
    Height (body only): 10.2 cm (4.0 inches)
    Flexible Antenna: 6.1 cm (2.4 inches)
    Width: 5.5 cm (2.1 inches)
    Depth: 3.7 cm (1.4 inches)
  • Input/Output:
    3.5mm (1/8 inches ) mono miniphone jac;
    Hot Shoe; USB Port; 6-pin Accessory Port
  • Operating Temperature:
    Above -15°C (5°F) and below 50°C (120°F)
  • Maximum Input Voltage: 250 VDC
  • Camera/Port 1: 0.5 A (1/2Amp), current limited
  • Flash/Port 2:
    4.0 A for 0.00002 seconds (1/50000 seconds or 20 microseconds)
    0.25 A (1/4 Amp or 250 milliamp) continuous, current limited
  • Voltage Present:
    For Port 1 and Hot Shoe = 3.3 VDC, 0.001 A
    (1/1000 Amp or 1 milliamp), regulated
  • Trigger Threshold: Less than 2.2 volts
  • Mounting:
    Hot Shoe, 1/4 - 20 female threads, lanyard and Velcro
  • Contact Time:
    999.9 seconds or 16 minutes, 39.99 seconds (min .01 sec)
  • Delay Time: 9.9999 seconds (min .0001 sec)
  • Intervalometer:
    99:59:59 or 4 days, 4 hours minus 1 second (min 1 sec)
  • MultiPop:
    999.9 seconds or 16 minutes, 39.99 seconds (min .01 sec)
  • Accuracy:
    Timing is repeatable within ± 1/10,000th of a second
  • Counter: 9999 triggers (min 0)
  • Preset Rear Curtain Delays:
    1, 1/2,1/4, 1/8, 1/15, 1/30 and 1/60th shutter speed


- PocketWizard MultiMax Tranceiver
- PC-1 camera synch cable
- lanyard
- velcro
- 2-alkaline batteries

You're reviewing: PocketWizard MultiMax Transceiver